YX-OS69 AD9361 SDR Software-Defined Radio Module – ZUSDR Pluto Alternative, FMCOMMS3 Communication Platform
- Verkaufspreis
- $985.00
- Normaler Preis
-
$1,231.00 - Normaler Preis
- $985.00
- Grundpreis
- pro
Sichere Kaufabwicklung garantiert
Verfügbarkeit für Abholungen konnte nicht geladen werden
Beschreibung
Beschreibung
ZUSDR is a high‑performance Software Defined Radio platform built around the Xilinx Zynq UltraScale+ XCZU3EG (quad‑core ARM Cortex‑A53 + FPGA) and the Analog Devices AD9361 wideband transceiver. Delivering 2×2 MIMO capability from 70 MHz to 6 GHz with up to 56 MHz bandwidth, this board is an ideal alternative to PlutoSDR and FMCOMMS3‑based systems for professional SDR development, communications research, and education.
- SoC: XCZU3EG · 4× Cortex‑A53 (1.33GHz) + 2× Cortex‑R5 (533MHz)
- Transceiver: AD9361 · 2× TX / 2× RX · 70MHz–6GHz · 56MHz BW
- Memory: 2GB DDR4 (PS) · 32MB Flash · 16GB eMMC
- RF power: +15dBm @ 2.4GHz · +5dBm @ 8GHz (external PA option)
- GPS disciplined clock: ±0.03 PPM · VC‑TCXO with DAC control
- Interfaces: Gigabit Ethernet · USB3.0 (RNDIS) · JTAG/UART · 60‑pin expansion
- Included: Full documentation, Vivado projects, GNU Radio examples, MATLAB support
Applications: SDR development, 5G prototyping, spectrum monitoring, radar, communications research, GNSS simulation, MIMO experiments.
| FPGA model | XCZU3EG-2SFC7841 (industrial) |
| Logic cells (LC) | 154,000 |
| Look‑up tables (LUT) | 71,000 |
| Flip‑flops | 141,000 |
| DSP slices | 360 |
| Block RAM | 7.6 Mbit |
| PS processor | 4× Cortex‑A53 @ 1.33GHz + 2× Cortex‑R5 @ 533MHz |
| DDR4 (PS) | 2GB · 32‑bit · 2400M (MT40A512M16LY‑075:E) |
| PLL/MMCM max speed | 775 MHz (recommended) |
| Temperature range | ‑40 to +85°C (industrial) |
| Model | AD9361BBCZ |
| ADC/DAC resolution | 12‑bit |
| Signal bandwidth | 200 kHz – 56 MHz |
| Channels | 2× TX / 2× RX (2×2 MIMO, each with I/Q) |
| TX frequency range | 47 MHz – 6.0 GHz |
| RX frequency range | 70 MHz – 6.0 GHz |
| RX noise figure | 2 dB (800 MHz LO) |
| TX EVM | ≤ -40 dB |
| TX noise floor | ≤ -157 dBm/Hz |
| LO step size | 2.4 Hz (max) |
| Synchronization | Multi‑device SYNC support |
| Gain control | AGC / manual gain |
- TX power (2.4GHz): +15 dBm (typical)
- TX power (8GHz): +5 dBm (typical — external PA required for higher)
- GPS disciplined clock: ±0.03 PPM accuracy
- VC‑TCXO: 40 MHz / 0.5 ppm with DAC control for precision tuning
- GPS PPS accuracy: 30 ns RMS
| Power | Type‑C with PD · 9–12V input · ~6–8W consumption |
| Clocks | 33.33M (PS), 50M (PL), 26M (PS GTR) · external clock via IPEX |
| USB | USB 3.0 slave · RNDIS virtual Ethernet · USB 2.0 compatible |
| Ethernet | Gigabit Ethernet (PS · RTL8211E) |
| JTAG / UART | FT2232HQ (2‑in‑1) |
| Expansion header | 60‑pin X0802WVS · 36 GPIO (1.8V) · PS GTR pair + ref clock |
| GPS | MAX‑M10S · on‑board |
| Storage | 32MB Flash (MT25QU256) · 16GB eMMC 5.1 · TF card slot |
| Sync | SYNC interface (IPEX connector) |
| RF connectors | SMA female (4×: TX1, TX2, RX1, RX2) |
| LNA / PA | TX PA: ~15dB gain @ 800MHz (NF ~3.8dB) |
- Voltage: 1.8V only for GPIO (BANK voltage fixed)
- 3.3V: Requires external level shifters for 3.3V peripherals
- Differential pairs: PS GTR transceiver pair + reference clock available
- Firmware: Optimized port of ZCU102 + FMCOMMS3 reference design
- Development: Vivado 2018.3 with license · drivers
- Bare‑metal: AD936x driver tutorials and examples
- Linux: Ubuntu 18.04 VM image · GNU Radio integration
- MATLAB: 2018a hardware support package
- Hardware: Schematic (PDF) · PCB CAD files · acrylic case files
- ZUSDR development board ×1
- Type‑C data cables ×2 (USB2.0 + USB3.0)
- SMA (female‑to‑female) cable ×1
- FM whip antenna ×1
- Acrylic protective panels ×2
- Nylon screw / standoff set ×1
- Baidu Cloud electronic data (download link) ×1




Allgemeine Geschäftsbedingungen
Allgemeine Geschäftsbedingungen
Versandinformationen
Bestellungen werden innerhalb von 48 Stunden vorbereitet. Für den internationalen Versand wird eine schnelle Kleinpaketlogistik genutzt.
- USA / Europa: ca. 8–14 Tage (Änderungen vorbehalten)
- Bei ungewöhnlichen Situationen werden Sie umgehend per E-Mail informiert
Rückgabe- und Kundendienstrichtlinien
Sollten Sie nach Erhalt des Produkts Fragen haben, kontaktieren Sie uns bitte umgehend. Rücksendungen oder Umtausch werden gemäß unseren Rückgaberichtlinien bearbeitet. Vielen Dank für Ihr Verständnis.
Dokumentation & Technischer Support

Größentabelle
Popup-Text
lorem Loren
Notified by email when this product becomes available
$985.00