-
Галерея мультимедиа
YX-OS68 Kintex-7 XC7K160T EDA Development Board – FPGA Teaching & Lab Platform for University Education
- Цена со скидкой
- $559.00
- Обычная цена
-
$699.00 - Обычная цена
- $559.00
- Цена за единицу
- за
Guaranteed safe checkout
Не удалось загрузить сведения о доступности самовывоза
Description
Description
K7EDA_EVAL is a professional FPGA development platform built around the Xilinx Kintex-7 XC7K160T-2FFG676I (industrial‑grade) device. Designed for university EDA teaching, research, and prototyping, this board offers a rich set of peripherals including Gigabit Ethernet, HDMI input/output, audio codec, RGB LCD interface, dual ADC/DAC, GTX high‑speed transceivers, and extensive expansion I/O.
- FPGA: XC7K160T-2FFG676I · 162,240 logic cells
- Memory: 512MB DDR3 (16‑bit, 1600M) · 32MB Flash (×2)
- High‑speed: 8× GTX transceivers · 4× SMA for TX/RX
- Video: HDMI input (ADV7611) · HDMI output · RGB LCD (40‑pin FPC)
- Audio: ADAU1761 codec · headphone/mic/speaker
- Interfaces: Gigabit Ethernet · USB‑JTAG · USB‑UART · PS/2 · SD card
- Expansion: 40‑pin header (2.5V/3.3V configurable) · 34 single‑ended / 17 differential
- Teaching‑ready: 12 LEDs · 12 switches · 5 buttons · 7‑segment displays · buzzer
Applications: EDA teaching, digital logic design, FPGA prototyping, embedded systems, video/image processing, communications research.
| FPGA model | XC7K160T-2FFG676I (industrial) |
| Logic cells (LC) | 162,240 |
| Look‑up tables (LUT) | 25,350 |
| Flip‑flops (CLB) | 202,800 |
| DSP slices | 600 |
| Block RAM | 11,700 Kb |
| GTX transceivers | 8 |
| Speed grade | -2 |
| Temperature range | ‑40 to +85°C (industrial) |
| PLL/MMCM max speed | 709 MHz (recommended) |
| DDR3 memory | MT41K256M16TW‑107 · 512 MB (16‑bit, 1600M) |
| Clock sources | 50M/20PPM (system) · 156.25M/20PPM (GTX reference) |
| GTX high‑speed | 4× SMA (TX0/RX0 pair) |
| Ethernet | Gigabit RGMII (RTL8211E‑VB) |
| USB‑JTAG | Type‑C (on‑board debug/programming) |
| USB‑UART | Type‑C (CH340 bridge) |
| HDMI input | ADV7611 · up to 1080p |
| HDMI output | FPGA direct · up to 1080p |
| RGB LCD | 40‑pin FPC (0.5mm, flip‑down connector) |
| Audio codec | ADAU1761 · headphone/mic/speaker |
| ADC | 2× SPI · 1 MSPS |
| DAC | 2× SPI · ~1 MSPS |
| SD card | TF card slot (SDIO/SPI) |
| PS/2 | Keyboard / mouse interface |
| Config Flash | 32 MB (FPGA BIT configuration) |
| User Flash | 32 MB (user accessible) |
| EEPROM | 24C02 (I²C) |
| LEDs | PG/DONE · 12 user LEDs · 3× RGB |
| Switches | 12× digital input · VOTADJ (BANK voltage select) |
| Buttons | 1× system reset · 5× user buttons |
| 7‑segment | 2× 4‑digit common‑cathode (red) |
| Buzzer | Passive · frequency programmable |
- Location: BANK15 · 34 I/Os (single‑ended or 17 differential pairs)
- Voltage: Configurable via VOTADJ switch — 2.5V (supports LVDS_25) or 3.3V
- Differential use: Set VOTADJ to 2.5V for LVDS_25 support
- K7EDA_EVAL development board ×1
- Type‑C data cable ×2
- SMA (female to female) 15 cm cable ×2
- Nylon standoff screw set ×1 (pre‑installed)
- Acrylic protective cover (front + back) ×2 (pre‑installed)
- 9V/2A Type‑C power adapter ×1 (for board only)
Terms and conditions
Terms and conditions
Shipping Information
Orders are prepared within 48 hours. Fast small-parcel logistics are used for international shipping.
- USA / Europe: approximately 8–14 days (subject to variation)
- Any abnormal situations will be communicated via email promptly
Returns & After-Sales Policy
If you have any questions after receiving the product, please contact us immediately. Returns or exchanges will be processed according to our return policy. Thank you for your understanding.
Documentation & Technical Support
Size Guide
Popup Text
lorem Loren
Notified by email when this product becomes available
$559.00